nokia 3110c flash

You should be able to see the flashing start now. Click on the Flash icon and the operation will be continuing If your phone while flashing switches on and does not want to turn back on, do the following steps: Disconnect your phone from the computer. Please be aware of the consequences and risks that may be result from this process. Flashing is required to repair any software related problem like hanging, switching off automatically, booting problem, contact service, etc. Always use the appropriate and possibly the newest firmware on your device.

Name: Mashakar
Format: JPEG, PNG
License: For Personal Use Only
iPhone 5, 5S resolutions 640×1136
iPhone 6, 6S resolutions 750×1334
iPhone 7, 7 Plus, 8, 8 Plus resolutions 1080×1920
Android Mobiles HD resolutions 360×640, 540×960, 720×1280
Android Mobiles Full HD resolutions 1080×1920
Mobiles HD resolutions 480×800, 768×1280
Mobiles QHD, iPhone X resolutions 1440×2560
HD resolutions 1280×720, 1366×768, 1600×900, 1920×1080, 2560×1440, Original

In the top menu open the Service Tool section. When the window with available options appears to choose the same path as it was before. How to read the product code Method 1: Comments Live Traffic Stats.

Always use the appropriate and possibly the newest firmware on your device. Disconnect your phone from the computer.

Nokia 3110c Rm-237__07.21 Flash File1000% Tested Without Password

It is tested as well as good and working software setup. Flashing and formatting of cell phone deletes all data like images, ringtones, music, contact numbers, etc. Next, in the Nokia BEST interface go to Flashing menu and make sure that the files load automatically to the empty brackets. As soon as the information about successfully completed installation appears on the screen choose Finish.


Afterwards dowload the Phoenix software. That way you will restore the default password but also lose all data on your device and bring all settings to the factory state.

Install the Nokia Care Suite. Although we always try to give the best and working flash files and firmwares, we do not guarantee the compatibility or accuracy of any of the files. The Nokia Suite has just been installed. Turn on the phone by holding the power button.

You cannot perform a hard reset operation. Make sure the software is the same or newer as it was before the flashing process downgrade is not possible. Finally, in case nothing else works, you may try installing softwares with many different product codes not neccesserily only Polish ones.

Install the Nokia Care Suite. If the Nokia BEST disconnects your device while flashing the device and you are asked to connect the phone, on the selected interface do the following sequence: Newer Post Older Post Home.

NOKIA classic Flashing by using the Phoenix Service Software –

You can switch it off by holding the Power button for a few seconds until you fell it vibrate. The battery in your device should be fully charged and the applications on your computer should be shut down. You can also flash any Nokia handset with Nokia phoenix service software. Afterwards go back to Use INI option and the files should load in the empty brackets. Please be aware of the consequences and risks that may be result from this process.


If there is a another window on your screen – “Flashing Completed” – there is a big chance your device’s screen will show “Local Mode”, “Test mode”, “Nokia logo”. Then from the top menu open Settings section, choose DataPackage path and check the address to folder which should contain the firmware files.

The firmware update instruction should pop up as soon as your computer sees your phone. Afterwards, copy from Nokia Care Suite directory and replace the usergroupsconfiguration. First of all, remove the back cover and the battery. Share to Twitter Share to Facebook. Open the Nokia Care Suite folder and click on the installer application.

If it does not happen, disconnect your device and press the Power button for a few seconds.

Start the discussion

Leave a Reply

Your email address will not be published. Required fields are marked *